ECOLOXTECH 1200 System with pH control (pH 4-6) - Generate Hypochlorous Acid (HOCl)

$33,540.00
(No reviews yet) Write a Review
SKU:
E-1200-PHC
Adding to cart… The item has been added

ECOLOX TECH 1200 with pH control

The EWCO 1200 prebuilt with pH control is designed to generate hypochlorous acid (HOCl) at an optimized pH between 4 and 6 although any pH can be generated between pH 4 and pH 8.

About the ECOLOX TECH 1200 Model

The EWCO 1200 model is an industrial-grade, low-maintenance, single stream system that generates hypochlorous acid (HOCl) in solution through the electrolysis of salt and water. The system uses patented electrolysis cells that are unique in that they generate a stable HOCl molecule that is electrically neutral and with high oxidation potential, contributing to its effectiveness against microbial pathogens. 

Technical

  • Model:  ECOLOX TECH 1200 System - see system comparison
  • Stainless Steel Build: 304SS or 316SS (Marine Grade)
  • Electrolysis Type:   Single Cell, Single Stream, Non-membrane Electrolysis
  • Power Supply:   110V/220V, 50/60Hz
  • E-1200 System Dimensions:   35 x 24 x 52 cm (13.8 x 9.5 x 20.5 inches)
  • E-1200 System Weight:   21.2 kg (47 lbs.)
  • Backboard Dimensions (pre-built): 140 x 81 x 30 cm (55 x 32 x 12 inches)
  • Backboard Weight (pre-built): 46 kg (100 lbs.)
  • Shipping Dimensions (in crate): 150 x 94 x 54 cm (59 x 37 x 21 inches)
  • Shipping Weight (in crate): 125 kg (275 lbs.)
  • Solution:   Hypochlorous Acid (HOCl)
  • Concentration:   10 to 400 ppm - see calculators
  • pH range: Acidic to Neutral (pH5-pH8) - pH controller can maintain between pH5 and pH6
  • Oxidation-Reduction Potential (ORP):   > 1000 mV

Production Rates

Using Normal Salt Water Additive

  • Rate @300 ppm: 3 L/minute (0.8 gal./minute)
  • Rate @225 ppm: 4 L/minute (1 gal./minute)
  • Rate @150 ppm: 6 L/minute (1.5 gal./minute)
  • Rate @75 ppm: 12 L/minute (3 gal./minute)
  • Rate @60 ppm: 16 L/minute (4.2 gal./minute)
  • Rate @50 ppm: 18 L/minute (4.8 gal./minute)
  • Rate @45 ppm: 20 L/minute (5.3 gal./minute)
  • Rate @40 ppm: 24 L/minute (6 gal./minute)

Using Acidified Salt Water Additive (HCl added)

  • Rate @400 ppm: 3 L/minute (0.8 gal./minute)
  • Rate @300 ppm: 4 L/minute (1 gal./minute)
  • Rate @200 ppm: 6 L/minute (1.5 gal./minute)
  • Rate @100 ppm: 12 L/minute (3 gal./minute)
  • Rate @75 ppm: 16 L/minute (4.2 gal./minute)
  • Rate @70 ppm: 18 L/minute (4.8 gal./minute)
  • Rate @60 ppm: 20 L/minute (5.3 gal./minute)
  • Rate @50 ppm: 24 L/minute (6 gal./minute)

Included with Pre-Built System on Backboard

  • EWCO 1200 System
  • Venturi pumps for pH control (by dosing Hydrochloric Acid - HCl)
  • Inflow water filter
  • Backflow preventer
  • Pressure regulator
  • Flow regulator valve
  • Installation and Operation Manuals
  • Chlorine Test Paper
  • pH Test Paper

Optional Add-ons 

  • Ultrasonic level sensor to mount on your own holding tank
  • Holding Tank with ultrasonic sensor pre-mounted
  • Salt Brine Additive Tank
  • Grundfos Pump for distribution

SDS

Calculators

Research

Regulatory Clearances for Food Contact

FDA FCN 1811USDA Organic